This post contains affiliate links. This means I will make a commission at no extra cost to you should you click through and make a purchase [ “As an Amazon Associate, I earn from qualifying purchases.” ]. Read the full disclosure here.
How to Get Your 2014 Silverado Lowered GuideMechanic.Com Before you install a lowering kit for your 2014 Silverado, there are a few things you should know.
Ensure that your truck’s wheels are securely fastened. Torque is necessary, and the amount depends on the type of studs. Also, check the steering wheel and make sure that the wheel is fully turned from lock to unlock.
The steering system should be free of any obstructed areas. After the installation, test the vehicle by driving it for several hundred miles to make sure everything is working properly.
How to Get Your 2014 Silverado Lowered
McGaughys lowering kit
The McGaughys 34070 Lowering Kit is specifically designed for the 2014-2015 Chevrolet Silverado 1500 Crew Cab and Quad Cab models.
The kit includes adjustable drop struts that lower the truck by a total of three inches and five inches, respectively. The lower kit’s drop can be further customized using a drop adjuster that allows you to set the front and rear drops to a custom level.
McGaughys’ suspension parts are available as bolt-on upgrades or as a complete replacement for stock suspension components.
These parts offer luxury ride quality and add to the aesthetics of the vehicle. They also reduce bottoming out and improve stability through turns. Choosing the right McGaughys lowering kit for your 2014 Silverado will enhance the overall look and feel of your truck.
Reklez lowering kit
The Reklez lowering kit for 2014 Silverado is an affordable option for those looking for a more aggressive look. Using the highest-quality parts from top manufacturers, the kit comes with adjustable front and rear suspensions.
This lowering kit includes rear street performance shocks, bump stops, and a flip kit. This suspension kit can be set to the desired drop for both two-wheel drive and four-wheel drive models.
This kit offers a 4/6 drop, the highest drop in truck lowering history. The C1500 and other mid-level pickups featured the 4/6 drop, making it the most popular choice.
The lowering kit is not a replacement for awd pickups. While lowering a truck is a personal preference, many people use the same suspension kit as their daily driver.
2014 Silverado Lowered
Belltech lowering kit
A 2014 Chevrolet Silverado lowered with a Belltech lowering kit will boost your car’s handling, turn-in-ability, and steering responsiveness.
With a new lower ride, you can also roll down the windows and crank the stereo for classic lowriding tunes. Whether you’re on a cruise or looking to make a bold statement, a lower ride will give your Chevy an edge over other cars in its class.
Many owners have had their Silverados lowered with lowering kits. BellTech lowering kits are the most popular choice among Silverados because of their high quality and low cost.
However, this company often runs out of stock so shop around before deciding on one. Another lowering kit is the Mcgaughys kit, which comes with adjustable rear shackles and a flip kit. This kit also includes rear shock extenders and a 2″ drop spindle.
When installing a lowering kit, you will first need to remove the tow hitch, which must be removed before you begin the process. Next, you will need to remove the leaf springs.
Depending on which model you have, you may need to use a 21mm socket, or a 24mm one. Make sure there is adequate clearance between the lowering kit and the steering system before tightening the bolts.
Once you’ve installed the new lowering kit, you’ll need to inspect the truck and check it again after a few hundred miles to make sure everything is working properly.
Lastly, you will need to install the new shackle. This shackle will replace the leaf springs and includes three holes for adjusting the height of the truck.
The new axle plates should then be installed over the axles. Once they have been secured with new u-bolts, you can now adjust the angle of the axles according to the lowering kit’s specifications. You should also install brake line hangers and adjust the pinion angle as per the instructions.
Maxtrac lowering kit
The Maxtrac lowering kit for 2014-2016 Chevy Silverado and GMC Sierra 1500 has been perfected by the company’s engineers. It uses 1″ front lowering springs and 2″ lowering spindles, and comes with a rear flip kit, rear shocks, and 2pc carrier bearing kit.
Unfortunately, the Maxtrac lowering kit for 2014-2016 Silverado and GMC Sierra 1500 does not fit vehicles with aluminum suspensions.
The MaxTrac lowering kit for 2014 Silverado is simple to install and comes in a variety of styles. It can lower your truck about 4 inches, resulting in a wider stance and improved handling.
If you want to reduce your truck’s ride height further, you may want to consider a MaxTrac suspension kit, which is guaranteed to fit your truck. It even comes with free shipping!
- P008C Fuel Cooler Pump Control Circuit Open - November 4, 2024
- P008D Fuel Cooler Pump Control Circuit Low - October 30, 2024
- P008E Fuel Cooler Pump Control Circuit High - October 26, 2024