This post contains affiliate links. This means I will make a commission at no extra cost to you should you click through and make a purchase [ “As an Amazon Associate, I earn from qualifying purchases.” ]. Read the full disclosure here.
Chevy Trax Check Engine Light – What to Do If Your Chevrolet Trax Shows the “Check Engine” Light GuideMechanic.Com Your Chevrolet Trax may be showing the “Check Engine” light.
It could be several problems. The symptoms and repair procedures for this problem are outlined below. Also, see what service intervals are recommended. Here is what to do if your check engine light is on:
Chevy Trax Check Engine Light
Symptoms
If you have a Chevrolet Trax, you may occasionally notice your dashboard lights illuminating. Depending on your model, this light can indicate a number of problems, including low fluid levels, low oil pressure, bad spark plugs, or loose connections.
A dying battery can also be the culprit. To reset the check engine light, disconnect the battery and turn the ignition on and off three times.
Depending on the type of problem, your car may require an expensive repair. For this, you will need to purchase a diagnostic scanner. These can be bought online or at a local auto parts store.
Your local store will be able to hook the code scanner up for you, giving you a code number to look up. Once you have the code number, you can research a possible repair. Common trouble codes for the Chevrolet Trax are P0300, P0171, and P0420.
Besides being a hassle to deal with, a check engine light can also be confusing for owners of Chevy Trax. It’s crucial to understand what it means and how to respond when you notice it.
If you are experiencing this problem, don’t panic! A check engine light is not a cause for a tow truck or a crash, it means that you need to get your car checked out.
Whether your Chevy Trax is showing the check engine light intermittently or randomly, a check engine light can be a sign of a more serious problem.
When your vehicle is giving you trouble, it’s important to have it checked out by a qualified mechanic. Even if it doesn’t seem urgent, a malfunctioning engine can lead to increased fuel usage and exhaust emissions. The problem could be as simple as a loose gas cap.
A broken spark plug can result in a number of problems, from poor acceleration to low fuel mileage. If your spark plugs are bad, your Trax won’t run properly. The ignition coils may also be clogged.
Read more: 2014 Chevy Cruze Spark Plug Gap
This will further damage your engine and catalytic converter. You should take your Trax to a mechanic right away, or else it can cost you a lot of money in repairs.
Causes
The Chevrolet Trax’s dashboard lights may occasionally illuminate, indicating that something is wrong with the engine.
There are several causes of the check engine light, including low fluid levels, a faulty catalytic converter, or a problem with the exhaust gas oxygen sensor.
If you are unable to diagnose the issue, you can try to reset the check engine light by disconnecting the battery connections and turning the ignition on and off three times.
To resolve this problem, you’ll need a diagnostic scanner. You can purchase one for very little money at your local auto parts store. They will connect the scanner to the Trax and provide a code number.
You’ll then need to research the cause of the code to determine what needs to be fixed. Listed below are some common problems and solutions for common Chevrolet Trax check engine light problems.
A loose gas cap can be another cause of a Chevrolet trax check engine light. It’s important to replace the gas cap as soon as you notice the problem. It can cause the check engine light to stay on or come on.
If you see that your engine is performing normal but the light still stays on, it’s likely a loose gas cap. If this is the case, you can visit a local auto parts store and have them scan your vehicle for free.
If the car won’t start, the battery and/or alternator are probably the culprit. Both of these parts are responsible for reducing emissions and routing fumes as gasoline vaporizes.
If your Chevy Trax has a damaged catalytic converter, it will not pass emissions tests and result in poor performance. Furthermore, your car will run at a higher temperature, which could lead to other potentially dangerous problems.
A 2016 chevy Trax might also be experiencing a problem with its speed. The check engine light will come on for about 20 minutes after the car starts.
In addition, it’ll shut down when it reaches its maximum speed. The turbo may freeze or be too hot to run properly, but the vehicle will go only 40 mph uphill and 60 mph on a flat or downhill highway. In addition, it won’t accelerate from a stop. This problem has been reported in as many as 10 chevy Trax vehicles.
Chevy Trax Check Engine Light
Repairs
The first step in repairing a Trax check engine light is to identify the cause. This can be a number of things. For example, your Trax might be having trouble starting.
You can determine the cause by checking the battery terminals for corrosion. If you find corrosion, you may not need to replace your battery.
However, you should check all possible causes before attempting any repair. This is because the reason your Trax is not starting isn’t always the same.
The first step in repairing a Trax check engine light is to check for a trouble code. Your vehicle’s engine control module contains trouble codes that identify the problem.
Using an electronic scanner, you can read these codes and identify the issue. Once you have determined the issue, you can then determine which repair method is best for your vehicle. Repairs for the Chevy Trax check engine light should always be completed as soon as possible.
Your Chevy Trax may also have a faulty mass airflow sensor, or MAF. The O2 sensor measures the amount of air entering your engine, and when there’s too much air in the engine, fuel is burned more rapidly than it needs to.
This sensor is a key component of the engine management system and can cause your vehicle to run poorly or even malfunction. If your Chevrolet Trax starts and idles poorly or is unable to accelerate, you might have a faulty mass airflow sensor.
Depending on the reason behind your check engine light, you can often make it go away on its own by performing some simple repairs. First, you should check the gas cap.
If it’s too loose, this could be the cause of your check engine light. If you can’t find this component, you should have your vehicle checked by a professional mechanic. It may be time to buy new tires or replace the gas tank.
If the engine doesn’t work properly, you should take it in for a checkup by a reputable mechanic. This problem is common among Trax models from 2015 to 2018.
Service intervals
When your Chevrolet Trax is on the fritz, it’s time to make an appointment for regular maintenance. The service intervals for Chevy Trax vehicles vary depending on the type of oil used and your specific car.
Regardless, you should have the light checked regularly and at the recommended intervals to keep your car in top shape.
The service interval is determined by the manufacturer and the service interval for your vehicle is listed on the dashboard as a flat key.
The Chevy Trax has a mass airflow sensor, or MAF, that measures the amount of air entering the engine. This part of the engine management system is responsible for determining the amount of fuel the engine needs to run efficiently.
It helps the engine to adapt to changes in temperature and altitude. Moreover, if your Chevy Trax has a damaged MAF, it may not pass emissions and have a poor engine performance. Additionally, the car will likely run hotter than normal, which can be dangerous.
If your Check Engine Light comes on even if your car is not on the fritz, take your vehicle to a mechanic for an inspection. They will use a code reader to read the code and diagnose the issue.
If the problem isn’t resolved on your first visit, it might take a few days for the monitoring system to confirm that the repair has been made. If the issue persists, you may have to return for another visit.
If your Chevy Trax has a check engine light, you may need to take it in for service soon. A few common issues include the gas cap, the catalytic converter, or ignition cylinder.
In the worst case scenario, the engine may misfire, or it may not start at all. Other problems could involve the catalytic converter or engine intake. If you experience an irregular engine run, the check engine light may be a warning for a serious problem.
If the check engine light keeps coming on and you still haven’t noticed a problem, you should contact a local dealership for a repair.
During these service intervals, your Chevy Trax’s computer monitors the performance of all important systems. Failure to repair the problem could cause serious damage to the catalytic converter, causing the check engine light to flash. If your spark plugs aren’t working properly, you should get them replaced if you experience this issue.
- P008C Fuel Cooler Pump Control Circuit Open - November 4, 2024
- P008D Fuel Cooler Pump Control Circuit Low - October 30, 2024
- P008E Fuel Cooler Pump Control Circuit High - October 26, 2024